Home » PS3 » OtherOS++ » Linux » Compiler Kernel 3.2.1 - loader ubuntu usb
|
|
| Re: Compiler Kernel 3.2.1 - loader ubuntu usb [message #441 is a reply to message #438] |
Sun, 29 January 2012 16:40   |
x_redentor
Messages: 138
Registered: January 2012
Location: españa
|
Gitbrew Assistant |
|
|
compile kernel from scratch with the latest instructions and start the same error "hctosys.c" but the system starts the X
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 38756k/65536k available (6592k kernel code, 26780k reserved, 904k data, 8559k bss, 240k init)
Hierarchical RCU implementation.
NR_IRQS:512 nr_irqs:512 16
time_init: decrementer frequency = 79.800000 MHz
time_init: processor frequency = 3192.000000 MHz
clocksource: timebase mult[3220149] shift[22] registered
clockevent: decrementer mult[146dc5d6] shift[32] cpu[0]
Console: colour dummy device 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 5855 kB
per task-struct memory footprint: 1920 bytes
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Brought up 2 CPUs
NET: Registered protocol family 16
opal: Node not found
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 3, 32768 bytes)
TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 32 (order: 0, 5120 bytes)
UDP-Lite hash table entries: 32 (order: 0, 5120 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ps3_system_bus_match:367: dev=4.0(vuart_01), drv=4.0(ps3_av): match
ps3_av vuart_01: ps3av_probe:1094: registered misc device 63
HugeTLB registered 16 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 427
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ps3_system_bus_match:367: dev=10.1(ioc0_01), drv=10.1(ps3fb): match
Console: switching to colour frame buffer device 140x40
ps3fb ioc0_01: graphics fb0, using 9152 KiB of video memory
ps3disk_init:580: registered block device major 254
ps3_system_bus_match:367: dev=6.0(sb_03), drv=6.0(ps3disk): match
ps3disk sb_03: accessible region 0 start 0 size 156301488
ps3disk sb_03: accessible region 1 start 524304 size 151582880
ps3disk sb_03: ps3stor_probe_access:132: 2 accessible regions found
ps3disk sb_03: ps3da is a FUJITSU MHZ2080BH G1 (76319 MiB total, 76319 MiB region)
ps3da: unknown partition table
ps3disk sb_03: ps3db is a FUJITSU MHZ2080BH G1 (76319 MiB total, 74015 MiB region)
ps3db: unknown partition table
brd: module loaded
loop: module loaded
ps3_system_bus_match:367: dev=7.0(sb_02), drv=7.0(ps3rom): match
scsi0 : ps3rom
scsi 0:0:0:0: CD-ROM SONY PS-SYSTEM 302R 4151 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ps3_system_bus_match:367: dev=3.0(sb_05), drv=3.0(ps3_gelic_driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3_gelic_driver sb_05: internal vlan enabled
ps3_gelic_driver sb_05: eth0: MAC addr 00:1f:a7:4f:b6:1f
ps3_gelic_driver sb_05: wlan0: MAC addr 00:1f:a7:4f:b6:1f
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ps3_system_bus_match:367: dev=1.0(sb_06), drv=1.0(ps3-ehci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ehci-driver sb_06: PS3 EHCI Host Controller
ps3-ehci-driver sb_06: new USB bus registered, assigned bus number 1
ps3-ehci-driver sb_06: irq 48, io mem 0x4000001b0000
ps3-ehci-driver sb_06: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: PS3 EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.2-test ehci_hcd
usb usb1: SerialNumber: sb_06
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ps3_system_bus_match:367: dev=1.0(sb_08), drv=1.0(ps3-ehci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ehci-driver sb_08: PS3 EHCI Host Controller
ps3-ehci-driver sb_08: new USB bus registered, assigned bus number 2
ps3-ehci-driver sb_08: irq 49, io mem 0x4000001c0000
ps3-ehci-driver sb_08: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: PS3 EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.2-test ehci_hcd
usb usb2: SerialNumber: sb_08
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ps3_system_bus_match:367: dev=2.0(sb_07), drv=2.0(ps3-ohci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ohci-driver sb_07: PS3 OHCI Host Controller
ps3-ohci-driver sb_07: new USB bus registered, assigned bus number 3
ps3-ohci-driver sb_07: irq 50, io mem 0x4000001d0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: PS3 OHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.2-test ohci_hcd
usb usb3: SerialNumber: sb_07
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ps3_system_bus_match:367: dev=2.0(sb_09), drv=2.0(ps3-ohci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ohci-driver sb_09: PS3 OHCI Host Controller
ps3-ohci-driver sb_09: new USB bus registered, assigned bus number 4
ps3-ohci-driver sb_09: irq 51, io mem 0x4000001e0000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: PS3 OHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.2-test ohci_hcd
usb usb4: SerialNumber: sb_09
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
ps3_system_bus_match:367: dev=5.0(vuart_02), drv=5.0(ps3_sys_manager): match
ps3_sys_manager vuart_02: ps3_sys_manager_probe:847: registered misc device 62
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Registering the dns_resolver key type
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 25sec before mounting root device...
usb 1-2: new high-speed USB device number 2 using ps3-ehci-driver
usb 1-2: New USB device found, idVendor=05e3, idProduct=0607
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 2-2: new high-speed USB device number 2 using ps3-ehci-driver
usb 2-2: New USB device found, idVendor=054c, idProduct=0267
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Bluetooth Transceiver
usb 2-2: Manufacturer: Sony
usb 1-2.1: new high-speed USB device number 3 using ps3-ehci-driver
usb 1-2.1: New USB device found, idVendor=059f, idProduct=1010
usb 1-2.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-2.1: Product: LaCie Desktop Hard Drive
usb 1-2.1: Manufacturer: LaCie
usb 1-2.1: SerialNumber: ST920217AS 3PW0H3RC
scsi1 : usb-storage 1-2.1:1.0
usb 1-2.2: new full-speed USB device number 4 using ps3-ehci-driver
usb 1-2.2: New USB device found, idVendor=03eb, idProduct=0902
usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2.2:1.0: USB hub found
hub 1-2.2:1.0: 4 ports detected
usb 1-2.2.3: new low-speed USB device number 5 using ps3-ehci-driver
usb 1-2.2.3: New USB device found, idVendor=1267, idProduct=0201
usb 1-2.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-2.2.3: Product: PS/2+USB Mouse
usb 1-2.2.4: new low-speed USB device number 6 using ps3-ehci-driver
usb 1-2.2.4: New USB device found, idVendor=046d, idProduct=c503
usb 1-2.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2.4: Product: USB Receiver
usb 1-2.2.4: Manufacturer: Logitech
scsi 1:0:0:0: Direct-Access ST920217 AS PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 38 00 00 00
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 240k freed
ps3flash_init:477: registered block device major 253
ps3_system_bus_match:367: dev=8.0(sb_04), drv=8.0(ps3flash): match
ps3flash sb_04: accessible region 0 start 0 size 524288
ps3flash sb_04: accessible region 1 start 8 size 30200
ps3flash sb_04: accessible region 2 start 30720 size 409088
ps3flash sb_04: accessible region 6 start 522752 size 512
ps3flash sb_04: ps3stor_probe_access:132: 4 accessible regions found
ps3flash sb_04: VFLASH is on
ps3flash sb_04: ps3flasha (256 MiB total, 256 MiB region)
ps3flasha: unknown partition table
ps3flash sb_04: ps3flashb (256 MiB total, 14 MiB region)
ps3flashb: unknown partition table
ps3flash sb_04: ps3flashc (256 MiB total, 199 MiB region)
ps3flashc:
ps3flash sb_04: ps3flashg (256 MiB total, 0 MiB region)
ps3flashg: unknown partition table
rtc-ps3 rtc-ps3: rtc core: registered rtc-ps3 as rtc0
input: PS/2+USB Mouse as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.0/input/input0
generic-usb 0003:1267:0201.0001: input,hidraw0: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-sb_06-2.2.3/input0
input: Logitech USB Receiver as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/input/input1
generic-usb 0003:046D:C503.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-sb_06-2.2.4/input0
input: Logitech USB Receiver as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/input/input2
generic-usb 0003:046D:C503.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Receiver] on usb-sb_06-2.2.4/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
ps3nflash_init:406: registered block device major 252
ps3_system_bus_match:367: dev=12.0(sb_01), drv=12.0(ps3nflash): match
ps3nflash sb_01: accessible region 0 start 0 size 32768
ps3nflash sb_01: accessible region 1 start 8 size 30712
ps3nflash sb_01: accessible region 2 start 30976 size 256
ps3nflash sb_01: accessible region 3 start 31232 size 1024
ps3nflash sb_01: ps3stor_probe_access:132: 4 accessible regions found
ps3nflash sb_01: ps3nflasha (16 MiB total, 16 MiB region)
ps3nflasha: unknown partition table
ps3nflash sb_01: ps3nflashb (16 MiB total, 14 MiB region)
ps3nflashb: unknown partition table
ps3nflash sb_01: ps3nflashc (16 MiB total, 0 MiB region)
ps3nflashc: unknown partition table
ps3nflash sb_01: ps3nflashd (16 MiB total, 0 MiB region)
ps3nflashd: unknown partition table
ps3vram: registered block device major 251
ps3_system_bus_match:367: dev=10.2(ioc0_03), drv=10.2(ps3vram): match
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: Created ram cache: 7 entries, 256 KiB each
ps3vram ioc0_03: ps3vram: Using 245 MiB of GPU memory
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
ps3_system_bus_match:367: dev=9.0(ioc0_02), drv=9.0(snd_ps3): match
PS3 sound started. start_delay=2000ms
Adding 650236k swap on /dev/sda6. Priority:-1 extents:1 across:650236k
EXT3-fs (sda1): using internal journal
sshd (1459): /proc/1459/oom_adj is deprecated, please use /proc/1459/oom_score_adj instead.
Adding 250876k swap on /dev/ps3vram. Priority:10 extents:1 across:250876k
eth0: no IPv6 routers present
ps3@ps3:~$
ps3@ps3:~$ ls -l /dev/ps3*
crw------- 1 root root 10, 63 ene 28 17:07 /dev/ps3avmngr
brw-rw---- 1 root disk 254, 0 ene 28 17:07 /dev/ps3da
brw-rw---- 1 root disk 254, 16 ene 28 17:07 /dev/ps3db
brw-rw---- 1 root disk 253, 0 ene 28 17:07 /dev/ps3flasha
brw-rw---- 1 root disk 253, 16 ene 28 17:07 /dev/ps3flashb
brw-rw---- 1 root disk 253, 32 ene 28 17:07 /dev/ps3flashc
brw-rw---- 1 root disk 253, 96 ene 28 17:07 /dev/ps3flashg
brw-rw---- 1 root disk 252, 0 ene 28 17:07 /dev/ps3nflasha
brw-rw---- 1 root disk 252, 16 ene 28 17:07 /dev/ps3nflashb
brw-rw---- 1 root disk 252, 32 ene 28 17:07 /dev/ps3nflashc
brw-rw---- 1 root disk 252, 48 ene 28 17:07 /dev/ps3nflashd
crw------- 1 root root 10, 62 ene 28 17:07 /dev/ps3sysmngr
brw-rw---- 1 root disk 251, 0 ene 28 17:07 /dev/ps3vram
ps3@ps3:~$
swapon
Filename Type Size Used Priority
/dev/sda6 partition 650236 0 -1
/dev/ps3vram partition 250876 0 10
lsmod
ps3@ps3:~$ lsmod
Module Size Used by
vfat 15292 1
fat 77038 1 vfat
snd_ps3 15852 0
snd_pcm 117508 1 snd_ps3
btusb 16601 0
snd_timer 31669 1 snd_pcm
snd 78092 3 snd_ps3,snd_pcm,snd_timer
bluetooth 224529 1 btusb
soundcore 1860 1 snd
ps3vram 14057 1
evdev 16434 5
ps3nflash 8768 0
sg 40379 0
joydev 16109 0
snd_page_alloc 8214 1 snd_pcm
usbhid 38563 0
rtc_ps3 3053 0
ps3flash 9731 0
ps3@ps3:~$
|
|
|
|
| Re: Compiler Kernel 3.2.1 - loader ubuntu usb [message #450 is a reply to message #441] |
Sun, 29 January 2012 22:00 |
x_redentor
Messages: 138
Registered: January 2012
Location: españa
|
Gitbrew Assistant |
|
|
Quote:*** 0000 : Setup Done
[boot]0015 Setup Done
PERCPU: Embedded 11 pages/cpu @c000000002300000 s12928 r0 d32128 u524288
pcpu-alloc: s12928 r0 d32128 u524288 alloc=1*1048576
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 16160
Kernel command line: root=/dev/sda1 rootdelay=10 video=ps3fb:mode:3
PID hash table entries: 256 (order: -1, 2048 bytes)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 39124k/65536k available (6260k kernel code, 26412k reserved, 868k data, 8558k bss, 236k init)
Hierarchical RCU implementation.
NR_IRQS:512 nr_irqs:512 16
time_init: decrementer frequency = 79.800000 MHz
time_init: processor frequency = 3192.000000 MHz
clocksource: timebase mult[3220149] shift[22] registered
clockevent: decrementer mult[146dc5d6] shift[32] cpu[0]
Console: colour dummy device 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 5855 kB
per task-struct memory footprint: 1920 bytes
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Brought up 2 CPUs
NET: Registered protocol family 16
opal: Node not found
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 3, 32768 bytes)
TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 32 (order: 0, 5120 bytes)
UDP-Lite hash table entries: 32 (order: 0, 5120 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ps3_system_bus_match:367: dev=4.0(vuart_01), drv=4.0(ps3_av): match
ps3_av vuart_01: ps3av_probe:1094: registered misc device 63
HugeTLB registered 16 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 428
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ps3disk_init:580: registered block device major 254
ps3_system_bus_match:367: dev=6.0(sb_03), drv=6.0(ps3disk): match
ps3disk sb_03: accessible region 0 start 0 size 156301488
ps3disk sb_03: accessible region 1 start 524304 size 151582880
ps3disk sb_03: ps3stor_probe_access:132: 2 accessible regions found
ps3disk sb_03: ps3da is a FUJITSU MHZ2080BH G1 (76319 MiB total, 76319 MiB region)
ps3da: unknown partition table
ps3disk sb_03: ps3db is a FUJITSU MHZ2080BH G1 (76319 MiB total, 74015 MiB region)
ps3db: unknown partition table
brd: module loaded
loop: module loaded
ps3_system_bus_match:367: dev=7.0(sb_02), drv=7.0(ps3rom): match
scsi0 : ps3rom
scsi 0:0:0:0: CD-ROM SONY PS-SYSTEM 302R 4151 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ps3_system_bus_match:367: dev=3.0(sb_05), drv=3.0(ps3_gelic_driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3_gelic_driver sb_05: internal vlan enabled
ps3_gelic_driver sb_05: eth0: MAC addr 00:1f:a7:4f:b6:1f
ps3_gelic_driver sb_05: wlan0: MAC addr 00:1f:a7:4f:b6:1f
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ps3_system_bus_match:367: dev=1.0(sb_06), drv=1.0(ps3-ehci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ehci-driver sb_06: PS3 EHCI Host Controller
ps3-ehci-driver sb_06: new USB bus registered, assigned bus number 1
ps3-ehci-driver sb_06: irq 47, io mem 0x400000170000
ps3-ehci-driver sb_06: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: PS3 EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.2-test ehci_hcd
usb usb1: SerialNumber: sb_06
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ps3_system_bus_match:367: dev=1.0(sb_08), drv=1.0(ps3-ehci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ehci-driver sb_08: PS3 EHCI Host Controller
ps3-ehci-driver sb_08: new USB bus registered, assigned bus number 2
ps3-ehci-driver sb_08: irq 48, io mem 0x400000180000
ps3-ehci-driver sb_08: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: PS3 EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.2-test ehci_hcd
usb usb2: SerialNumber: sb_08
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ps3_system_bus_match:367: dev=2.0(sb_07), drv=2.0(ps3-ohci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ohci-driver sb_07: PS3 OHCI Host Controller
ps3-ohci-driver sb_07: new USB bus registered, assigned bus number 3
ps3-ohci-driver sb_07: irq 49, io mem 0x400000190000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: PS3 OHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.2-test ohci_hcd
usb usb3: SerialNumber: sb_07
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ps3_system_bus_match:367: dev=2.0(sb_09), drv=2.0(ps3-ohci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ohci-driver sb_09: PS3 OHCI Host Controller
ps3-ohci-driver sb_09: new USB bus registered, assigned bus number 4
ps3-ohci-driver sb_09: irq 50, io mem 0x4000001a0000
usb 1-2: new high-speed USB device number 2 using ps3-ehci-driver
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: PS3 OHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.2-test ohci_hcd
usb usb4: SerialNumber: sb_09
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
ps3_system_bus_match:367: dev=5.0(vuart_02), drv=5.0(ps3_sys_manager): match
ps3_sys_manager vuart_02: ps3_sys_manager_probe:847: registered misc device 62
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Registering the dns_resolver key type
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 10sec before mounting root device...
usb 1-2: New USB device found, idVendor=05e3, idProduct=0607
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 2-2: new high-speed USB device number 2 using ps3-ehci-driver
usb 2-2: New USB device found, idVendor=054c, idProduct=0267
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Bluetooth Transceiver
usb 2-2: Manufacturer: Sony
usb 1-2.1: new high-speed USB device number 3 using ps3-ehci-driver
usb 1-2.1: New USB device found, idVendor=059f, idProduct=1010
usb 1-2.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-2.1: Product: LaCie Desktop Hard Drive
usb 1-2.1: Manufacturer: LaCie
usb 1-2.1: SerialNumber: ST920217AS 3PW0H3RC
scsi1 : usb-storage 1-2.1:1.0
usb 1-2.2: new full-speed USB device number 4 using ps3-ehci-driver
usb 1-2.2: New USB device found, idVendor=03eb, idProduct=0902
usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2.2:1.0: USB hub found
hub 1-2.2:1.0: 4 ports detected
usb 1-2.2.1: new low-speed USB device number 5 using ps3-ehci-driver
usb 1-2.2.1: New USB device found, idVendor=1267, idProduct=0201
usb 1-2.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-2.2.1: Product: PS/2+USB Mouse
usb 1-2.2.4: new low-speed USB device number 6 using ps3-ehci-driver
usb 1-2.2.4: New USB device found, idVendor=046d, idProduct=c503
usb 1-2.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2.4: Product: USB Receiver
usb 1-2.2.4: Manufacturer: Logitech
scsi 1:0:0:0: Direct-Access ST920217 AS PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 38 00 00 00
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 236k freed
rtc-ps3 rtc-ps3: rtc core: registered rtc-ps3 as rtc0
ps3nflash_init:406: registered block device major 253
ps3_system_bus_match:367: dev=12.0(sb_01), drv=12.0(ps3nflash): match
ps3nflash sb_01: accessible region 0 start 0 size 32768
ps3nflash sb_01: accessible region 1 start 8 size 30712
ps3nflash sb_01: accessible region 2 start 30976 size 256
ps3nflash sb_01: accessible region 3 start 31232 size 1024
ps3nflash sb_01: ps3stor_probe_access:132: 4 accessible regions found
ps3nflash sb_01: ps3nflasha (16 MiB total, 16 MiB region)
ps3nflasha: unknown partition table
ps3nflash sb_01: ps3nflashb (16 MiB total, 14 MiB region)
ps3nflashb: unknown partition table
ps3nflash sb_01: ps3nflashc (16 MiB total, 0 MiB region)
ps3nflashc: unknown partition table
ps3nflash sb_01: ps3nflashd (16 MiB total, 0 MiB region)
ps3nflashd: unknown partition table
ps3flash_init:477: registered block device major 252
ps3_system_bus_match:367: dev=8.0(sb_04), drv=8.0(ps3flash): match
ps3flash sb_04: accessible region 0 start 0 size 524288
ps3flash sb_04: accessible region 1 start 8 size 30200
ps3flash sb_04: accessible region 2 start 30720 size 409088
ps3flash sb_04: accessible region 6 start 522752 size 512
ps3flash sb_04: ps3stor_probe_access:132: 4 accessible regions found
ps3flash sb_04: VFLASH is on
ps3flash sb_04: ps3flasha (256 MiB total, 256 MiB region)
ps3flasha: unknown partition table
ps3flash sb_04: ps3flashb (256 MiB total, 14 MiB region)
ps3flashb: unknown partition table
ps3flash sb_04: ps3flashc (256 MiB total, 199 MiB region)
ps3flashc:
ps3flash sb_04: ps3flashg (256 MiB total, 0 MiB region)
ps3flashg: unknown partition table
input: PS/2+USB Mouse as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/input/input0
generic-usb 0003:1267:0201.0001: input,hidraw0: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-sb_06-2.2.1/input0
input: Logitech USB Receiver as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/input/input1
generic-usb 0003:046D:C503.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-sb_06-2.2.4/input0
input: Logitech USB Receiver as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/input/input2
generic-usb 0003:046D:C503.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Receiver] on usb-sb_06-2.2.4/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
ps3_system_bus_match:367: dev=10.1(ioc0_01), drv=10.1(ps3fb): match
Console: switching to colour frame buffer device 140x40
ps3fb ioc0_01: graphics fb0, using 9152 KiB of video memory
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ps3_system_bus_match:367: dev=9.0(ioc0_02), drv=9.0(snd_ps3): match
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
PS3 sound started. start_delay=2000ms
Adding 650236k swap on /dev/sda6. Priority:-1 extents:1 across:650236k
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: (null)
eth0: no IPv6 routers present
sshd (1293): /proc/1293/oom_adj is deprecated, please use /proc/1293/oom_score_adj instead.
gelic_eurus_sync_cmd_worker: cmd issue failed
wlan0: no IPv6 routers present
ps3@ps3:~$
FAT back often start with clean and perfect for my taste and without error, the petitboot now, thanks for all that is teaching me
|
|
|
|
| Re: Compiler Kernel 3.2.1 - loader ubuntu usb [message #451 is a reply to message #450] |
Sun, 29 January 2012 22:38 |
x_redentor
Messages: 138
Registered: January 2012
Location: españa
|
Gitbrew Assistant |
|
|
clear without errors because it is not enabled virtual flash video
I have started an active and failures
Memory: 38868k/65536k available (6500k kernel code, 26668k reserved, 884k data, 8559k bss, 240k init)
Hierarchical RCU implementation.
NR_IRQS:512 nr_irqs:512 16
time_init: decrementer frequency = 79.800000 MHz
time_init: processor frequency = 3192.000000 MHz
clocksource: timebase mult[3220149] shift[22] registered
clockevent: decrementer mult[146dc5d6] shift[32] cpu[0]
Console: colour dummy device 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 5855 kB
per task-struct memory footprint: 1920 bytes
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Brought up 2 CPUs
NET: Registered protocol family 16
opal: Node not found
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 3, 32768 bytes)
TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 32 (order: 0, 5120 bytes)
UDP-Lite hash table entries: 32 (order: 0, 5120 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ps3_system_bus_match:367: dev=4.0(vuart_01), drv=4.0(ps3_av): match
ps3_av vuart_01: ps3av_probe:1094: registered misc device 63
HugeTLB registered 16 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 427
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ps3_system_bus_match:367: dev=10.1(ioc0_01), drv=10.1(ps3fb): match
Console: switching to colour frame buffer device 140x40
ps3fb ioc0_01: graphics fb0, using 9152 KiB of video memory
ps3disk_init:580: registered block device major 254
ps3_system_bus_match:367: dev=6.0(sb_03), drv=6.0(ps3disk): match
ps3disk sb_03: accessible region 0 start 0 size 156301488
ps3disk sb_03: accessible region 1 start 524304 size 151582880
ps3disk sb_03: ps3stor_probe_access:132: 2 accessible regions found
ps3disk sb_03: ps3da is a FUJITSU MHZ2080BH G1 (76319 MiB total, 76319 MiB region)
ps3da: unknown partition table
ps3disk sb_03: ps3db is a FUJITSU MHZ2080BH G1 (76319 MiB total, 74015 MiB region)
ps3db: unknown partition table
ps3flash_init:477: registered block device major 253
ps3_system_bus_match:367: dev=8.0(sb_04), drv=8.0(ps3flash): match
ps3flash sb_04: accessible region 0 start 0 size 524288
ps3flash sb_04: accessible region 1 start 8 size 30200
ps3flash sb_04: accessible region 2 start 30720 size 409088
ps3flash sb_04: accessible region 6 start 522752 size 512
ps3flash sb_04: ps3stor_probe_access:132: 4 accessible regions found
ps3flash sb_04: VFLASH is on
ps3flash sb_04: ps3flasha (256 MiB total, 256 MiB region)
ps3flasha: unknown partition table
ps3flash sb_04: ps3flashb (256 MiB total, 14 MiB region)
ps3flashb: unknown partition table
ps3flash sb_04: ps3flashc (256 MiB total, 199 MiB region)
ps3flashc:
ps3flash sb_04: ps3flashg (256 MiB total, 0 MiB region)
ps3flashg: unknown partition table
ps3nflash_init:406: registered block device major 252
ps3_system_bus_match:367: dev=12.0(sb_01), drv=12.0(ps3nflash): match
ps3nflash sb_01: accessible region 0 start 0 size 32768
ps3nflash sb_01: accessible region 1 start 8 size 30712
ps3nflash sb_01: accessible region 2 start 30976 size 256
ps3nflash sb_01: accessible region 3 start 31232 size 1024
ps3nflash sb_01: ps3stor_probe_access:132: 4 accessible regions found
ps3nflash sb_01: ps3nflasha (16 MiB total, 16 MiB region)
ps3nflasha: unknown partition table
ps3nflash sb_01: ps3nflashb (16 MiB total, 14 MiB region)
ps3nflashb: unknown partition table
ps3nflash sb_01: ps3nflashc (16 MiB total, 0 MiB region)
ps3nflashc: unknown partition table
ps3nflash sb_01: ps3nflashd (16 MiB total, 0 MiB region)
ps3nflashd: unknown partition table
brd: module loaded
loop: module loaded
ps3_system_bus_match:367: dev=7.0(sb_02), drv=7.0(ps3rom): match
scsi0 : ps3rom
scsi 0:0:0:0: CD-ROM SONY PS-SYSTEM 302R 4151 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ps3_system_bus_match:367: dev=3.0(sb_05), drv=3.0(ps3_gelic_driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3_gelic_driver sb_05: internal vlan enabled
ps3_gelic_driver sb_05: eth0: MAC addr 00:1f:a7:4f:b6:1f
ps3_gelic_driver sb_05: wlan0: MAC addr 00:1f:a7:4f:b6:1f
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ps3_system_bus_match:367: dev=1.0(sb_06), drv=1.0(ps3-ehci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ehci-driver sb_06: PS3 EHCI Host Controller
ps3-ehci-driver sb_06: new USB bus registered, assigned bus number 1
ps3-ehci-driver sb_06: irq 50, io mem 0x4000001b0000
ps3-ehci-driver sb_06: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: PS3 EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.2-test ehci_hcd
usb usb1: SerialNumber: sb_06
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ps3_system_bus_match:367: dev=1.0(sb_08), drv=1.0(ps3-ehci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ehci-driver sb_08: PS3 EHCI Host Controller
ps3-ehci-driver sb_08: new USB bus registered, assigned bus number 2
ps3-ehci-driver sb_08: irq 51, io mem 0x4000001c0000
ps3-ehci-driver sb_08: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: PS3 EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.2-test ehci_hcd
usb usb2: SerialNumber: sb_08
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ps3_system_bus_match:367: dev=2.0(sb_07), drv=2.0(ps3-ohci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ohci-driver sb_07: PS3 OHCI Host Controller
ps3-ohci-driver sb_07: new USB bus registered, assigned bus number 3
ps3-ohci-driver sb_07: irq 52, io mem 0x4000001d0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: PS3 OHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.2-test ohci_hcd
usb usb3: SerialNumber: sb_07
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ps3_system_bus_match:367: dev=2.0(sb_09), drv=2.0(ps3-ohci-driver): match
dma_sb_region_create_linear:989: forcing 16M pages for linear map
ps3-ohci-driver sb_09: PS3 OHCI Host Controller
ps3-ohci-driver sb_09: new USB bus registered, assigned bus number 4
ps3-ohci-driver sb_09: irq 53, io mem 0x4000001e0000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: PS3 OHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.2-test ohci_hcd
usb usb4: SerialNumber: sb_09
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
ps3_system_bus_match:367: dev=5.0(vuart_02), drv=5.0(ps3_sys_manager): match
ps3_sys_manager vuart_02: ps3_sys_manager_probe:847: registered misc device 62
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Registering the dns_resolver key type
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 25sec before mounting root device...
usb 1-2: new high-speed USB device number 2 using ps3-ehci-driver
usb 1-2: New USB device found, idVendor=05e3, idProduct=0607
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 2-2: new high-speed USB device number 2 using ps3-ehci-driver
usb 2-2: New USB device found, idVendor=054c, idProduct=0267
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Bluetooth Transceiver
usb 2-2: Manufacturer: Sony
usb 1-2.1: new high-speed USB device number 3 using ps3-ehci-driver
usb 1-2.1: New USB device found, idVendor=059f, idProduct=1010
usb 1-2.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-2.1: Product: LaCie Desktop Hard Drive
usb 1-2.1: Manufacturer: LaCie
usb 1-2.1: SerialNumber: ST920217AS 3PW0H3RC
scsi1 : usb-storage 1-2.1:1.0
usb 1-2.2: new full-speed USB device number 4 using ps3-ehci-driver
usb 1-2.2: New USB device found, idVendor=03eb, idProduct=0902
usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2.2:1.0: USB hub found
hub 1-2.2:1.0: 4 ports detected
usb 1-2.2.1: new low-speed USB device number 5 using ps3-ehci-driver
usb 1-2.2.1: New USB device found, idVendor=1267, idProduct=0201
usb 1-2.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-2.2.1: Product: PS/2+USB Mouse
usb 1-2.2.4: new low-speed USB device number 6 using ps3-ehci-driver
usb 1-2.2.4: New USB device found, idVendor=046d, idProduct=c503
usb 1-2.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2.4: Product: USB Receiver
usb 1-2.2.4: Manufacturer: Logitech
scsi 1:0:0:0: Direct-Access ST920217 AS PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 38 00 00 00
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 240k freed
rtc-ps3 rtc-ps3: rtc core: registered rtc-ps3 as rtc0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
ps3vram: registered block device major 251
ps3_system_bus_match:367: dev=10.2(ioc0_03), drv=10.2(ps3vram): match
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: Created ram cache: 7 entries, 256 KiB each
ps3vram ioc0_03: ps3vram: Using 245 MiB of GPU memory
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
input: PS/2+USB Mouse as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/input/input0
generic-usb 0003:1267:0201.0001: input,hidraw0: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-sb_06-2.2.1/input0
input: Logitech USB Receiver as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/input/input1
generic-usb 0003:046D:C503.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-sb_06-2.2.4/input0
input: Logitech USB Receiver as /devices/ps3_system/sb_06/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/input/input2
generic-usb 0003:046D:C503.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Receiver] on usb-sb_06-2.2.4/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ps3_system_bus_match:367: dev=9.0(ioc0_02), drv=9.0(snd_ps3): match
PS3 sound started. start_delay=2000ms
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Adding 650236k swap on /dev/sda6. Priority:-1 extents:1 across:650236k
EXT3-fs (sda1): using internal journal
sshd (1502): /proc/1502/oom_adj is deprecated, please use /proc/1502/oom_score_adj instead.
eth0: no IPv6 routers present
Adding 250876k swap on /dev/ps3vram. Priority:10 extents:1 across:250876k
gelic_eurus_sync_cmd_worker: cmd issue failed
wlan0: no IPv6 routers present
ps3@ps3:~$
errores ps3vram
ps3vram: registered block device major 251
ps3_system_bus_match:367: dev=10.2(ioc0_03), drv=10.2(ps3vram): match
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: Created ram cache: 7 entries, 256 KiB each
ps3vram ioc0_03: ps3vram: Using 245 MiB of GPU memory
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
ps3vram ioc0_03: ps3vram_fire_ring: lv1_gpu_fb_blit failed -11
and if on the ps3vram, causes this in the start of the ps3
Quote:
[Updated on: Sun, 29 January 2012 22:43] Report message to a moderator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Compiler Kernel 3.2.1 - loader ubuntu usb [message #915 is a reply to message #522] |
Sat, 17 March 2012 19:57 |
nikitis
Messages: 58
Registered: July 2011
Location: The Dirty South
|
Gitbrew Member |
|
|
Hit a snag trying to cross compile linux 3.
I built gcc 4.6.2 and binutils 2.22.
I got to this step and got this error, no errors up to this point:
anonymous@ps3mint ~/Source/linux-3.2.11 $ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux- install INSTALL_PATH=$HOME/linux-3.2.11-build/boot LOCALVERSION="-test"
DTC arch/powerpc/boot/ps3.dtb
DTC: dts->dtb on file "arch/powerpc/boot/dts/ps3.dts"
WRAP arch/powerpc/boot/dtbImage.ps3
512+0 records in
512+0 records out
512 bytes (512 B) copied, 0.000988393 s, 518 kB/s
512+0 records in
512+0 records out
512 bytes (512 B) copied, 0.00111132 s, 461 kB/s
sh -x /home/anonymous/Source/linux-3.2.11/arch/powerpc/boot/instal l.sh "3.2.11-test" vmlinux System.map "/home/anonymous/linux-3.2.11-build/boot" arch/powerpc/boot/zImage.pseries arch/powerpc/boot/dtbImage.ps3
+ set -e
+ [ -x /home/anonymous/bin/installkernel ]
+ [ -x /sbin/installkernel ]
+ exec /sbin/installkernel 3.2.11-test vmlinux System.map /home/anonymous/linux-3.2.11-build/boot arch/powerpc/boot/zImage.pseries arch/powerpc/boot/dtbImage.ps3
Usage: installkernel <version> <image> <System.map> <directory>
make[1]: *** [install] Error 1
rm arch/powerpc/boot/ps3.dtb
make: *** [install] Error 2
I'm not sure when I'm supposed to apply those patches you have up on the site. The howto doesn't state when and being new at cross compiling, there's a lot of things I do not understand. From what I can tell we are building the kernel for a ps3 debian install while on our PC's. But the above error makes no sense to me.
[Updated on: Sat, 17 March 2012 20:33] Report message to a moderator |
|
|
|
|
|
|
|
| Re: Compiler Kernel 3.2.1 - loader ubuntu usb [message #919 is a reply to message #918] |
Sat, 17 March 2012 21:17 |
glevand
Messages: 955
Registered: July 2011
Location: SONY
|
Gitbrew God |
|
|
And you can leave out LOCALVERSION while compiling/configuring a Linux kernel.
It's only an example how to add custom suffix to your linux kernels so you can install several
at once with different names. E.g one stable with no suffix and one for testing with -test suffix. This way you will always have a kernel to boot in case something goes wrong with your new -test kernel if it doesn't boot.
[Updated on: Sat, 17 March 2012 21:19] Report message to a moderator |
|
|
|
|
|
|
|
| Re: Compiler Kernel 3.2.1 - loader ubuntu usb [message #922 is a reply to message #920] |
Sat, 17 March 2012 21:23 |
nikitis
Messages: 58
Registered: July 2011
Location: The Dirty South
|
Gitbrew Member |
|
|
I apologize for having so many questions. I have some end goals for completing these projects. I've learned a lot about linux compiling in the last few days, but i'm still somewhat of a noob at some of this. I tend to take Howto's too literally and when they don't work as planned i'm more lost then ever generating more questions. I'll try what you've said and report back.
Your base config is good enough for me. or a Basic config with ps3 stuff.
[Updated on: Sat, 17 March 2012 21:23] Report message to a moderator |
|
|
|
|
|
| Re: Compiler Kernel 3.2.1 - loader ubuntu usb [message #924 is a reply to message #923] |
Sat, 17 March 2012 22:08 |
nikitis
Messages: 58
Registered: July 2011
Location: The Dirty South
|
Gitbrew Member |
|
|
I just tried again. Patched. Went well.
Didn't use ps3_defconfig.
I used your config-3.2.11 copied to .config.
make ARCH=powerpc CROSS_COMPILE=powerpc64-linux- menuconfig
Loaded alternate config. selected .config, then saved.
make ARCH=powerpc CROSS_COMPILE=powerpc64-linux-
mkdir -p $HOME/linux-3.2.11-build/boot
This is where it fails.
make ARCH=powerpc CROSS_COMPILE=powerpc64-linux- install INSTALL_PATH=$HOME/linux-3.2.11-build/boot
Quote:anonymous@ps3mint ~/Source/linux-3.2.11 $ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux- install INSTALL_PATH=$HOME/linux-3.2.11-build/boot
DTC arch/powerpc/boot/ps3.dtb
DTC: dts->dtb on file "arch/powerpc/boot/dts/ps3.dts"
WRAP arch/powerpc/boot/dtbImage.ps3
512+0 records in
512+0 records out
512 bytes (512 B) copied, 0.000692826 s, 739 kB/s
512+0 records in
512+0 records out
512 bytes (512 B) copied, 0.0017533 s, 292 kB/s
sh -x /home/anonymous/Source/linux-3.2.11/arch/powerpc/boot/instal l.sh "3.2.11" vmlinux System.map "/home/anonymous/linux-3.2.11-build/boot" arch/powerpc/boot/zImage.pseries arch/powerpc/boot/dtbImage.ps3
+ set -e
+ [ -x /home/anonymous/bin/installkernel ]
+ [ -x /sbin/installkernel ]
+ exec /sbin/installkernel 3.2.11 vmlinux System.map /home/anonymous/linux-3.2.11-build/boot arch/powerpc/boot/zImage.pseries arch/powerpc/boot/dtbImage.ps3
Usage: installkernel <version> <image> <System.map> <directory>
make[1]: *** [install] Error 1
rm arch/powerpc/boot/ps3.dtb
make: *** [install] Error 2
Any idea why?
Is something broken in the install.sh script? or been updated?
EDIT:
Looking it over, the only thing I see is that it's adding arch/powerpc/boot/dtbImage.ps3 in there when usage doesn't ask for that. If that is the case, how can we prevent it?
[Updated on: Sat, 17 March 2012 22:20] Report message to a moderator |
|
|
|
|
|
|
|
| Re: Compiler Kernel 3.2.1 - loader ubuntu usb [message #928 is a reply to message #926] |
Mon, 19 March 2012 03:18 |
nikitis
Messages: 58
Registered: July 2011
Location: The Dirty South
|
Gitbrew Member |
|
|
Okay, I just manually copied the 4 files into ~/linux-3.2.11-build/boot.
~/linux-3.2.11/vmlinux
~/linux-3.2.11/System.map
~/linux-3.2.11/arch/powerpc/boot/zImage.pseries
~/linux-3.2.11/arch/powerpc/boot/dtbImage.ps3
Into:
~/linux-3.2.11-build/boot/
I'm hoping that is all that is needed since /sbin/installkernel script fails miserably in Linux Mint. Can you verify this is all that is needed by the command.
make ARCH=powerpc CROSS_COMPILE=powerpc64-linux- install INSTALL_PATH=$HOME/linux-3.2.11-build/boot
I'm also confused on the steps Recompile the kernel after copying the files to the PS3. It seems it already has those 5 driver/scsi files already copied. Why recompile?
And the Kernel Makefile at the bottom of the howto. When am I supposed to execute that? Did I not already compile the kernel? And from what directory?
Thanks
[Updated on: Mon, 19 March 2012 03:19] Report message to a moderator |
|
|
|
|
|
|
|
Goto Forum:
Current Time: Wed Jun 19 23:19:53 CEST 2013
Total time taken to generate the page: 0.02995 seconds
|
Official Gitbrew Forums
Members
Search
Help
Register
Login
Home
